2. Technical specifications

Table 1 lists the main technical specifications for the MPM500 pneumatic module and Figure 2 shows its principal dimensions. The module essentially consists of two 3/2 NC solenoid valves that can be controlled independently.

Table 1 Technical specifications for the MPM500 module

Characteristics	Value
Pneumatic valve type	3/2 NC solenoid valves
Pneumatic valves action lines	ports 1 & 2
Compressed air connector	port IN
Operating pressure	0–7 bar (0–102 psi)
Flow rate	29.74 LPM (1.05 CFM)
Response time	ON/OFF: 8/10 ms
Ports	Four M5 threaded orifices, of which ports 1, 2, and IN are with preinstalled barb fittings for 1/16-in ID tubes and port OUT is with a preinstalled pneumatic muffler.
Housing	Coated aluminum alloy
Total weight	108 g
Operating temperature	5° to 55°C
Operating humidity	10% to 95% RH (non-condensing)

Figure 2 Dimensions of the MPM500 module

Note

You can download the CAD file of the MPM500 pneumatic module from here.