About this manual#
This user manual describes how to use Mecademic’s MecaPortal, in the case of the Meca500 robot.
Symbol definitions#
The following table lists the symbols that may be used in Mecademic documents to denote certain conditions. Particular attention must be paid to the warning and danger messages in this manual.
Note
Identifies information that requires special consideration.
Warning
Provides indications that must be respected in order to avoid equipment or work (data) on the system being damaged or lost.
Danger
Provides indications that must be respected in order to avoid a potentially hazardous situation, which could result in injury.
Revision history#
The firmware that is installed on Mecademic products has the following numbering convention:
{major}.{minor}.{patch}.{build}
Each Mecademic manual is written for a specific {major}.{minor}.{*}.{*} firmware version. On a regular basis, we revise each manual, adding further information and improving certain explanations. We only provide the latest revision for each {major}.{minor}.{*}.{*} firmware version. Below is a summary of the changes made in each revision.
Revision |
Date |
Comments |
|---|---|---|
A |
November 27, 2025 |
This version |
The document ID for each Mecademic manual in a particular language is the same, regardless of the firmware version and the revision number.